Tìm kiếm

How to Place a PVC Film Trial Order Below MOQ (Starting at 100 kg)

Every buyer hits the same wall: the specification is agreed, the price looks right, and then the supplier says “our MOQ is 500 kg”. For a bag factory testing a new material, or a distributor adding a colour, 500 kg is not a test — it is a commitment. The honest answer is that MOQ is a real cost, not a negotiating trick, and the way around it is a structured trial order rather than a discount. This guide explains where MOQ comes from, what a 100 kg trial can realistically do, what it costs per kilogram, and how to convert a trial into a normal order without paying the small-batch premium twice.

1. Why a factory has a minimum order at all

The number is not arbitrary. Four costs drive it:

  • Line cleaning and colour change. Switching from a dark colour to a light one means purging the calender or extruder — typically 20–40 kg of material that becomes scrap. On a 100 kg order that scrap is 20–40% of the run.
  • Resin purchasing happens in 25 kg bags or one-tonne bulk sacks, and additive masterbatch comes in fixed pack sizes.
  • Minimum roll length. Slitting and winding have a practical minimum; below it you get more core and edge trim than film.
  • Opportunity cost. A short run still occupies a slot that a container order could have used — which is why small orders are scheduled around larger ones, not first.

Understanding this changes the negotiation: you are not asking for a favour, you are asking the factory to accept a higher cost per kilogram in exchange for a lower total risk on your side. That is a fair trade, and most plants will take it once, for a new customer with a defined specification.

2. What a 100 kg trial actually gives you

At 0.30 mm and 1.37 m wide, 100 kg is roughly 174 running metres (0.575 kg per metre). In practice that is:

  • 3–5 rolls of a single specification, or two colours split across rolls
  • Enough to run your own process once — printing, lamination, high-frequency welding or sewing — and see how the film behaves at your machine speed
  • Enough to give 2–3 of your own customers a finished sample so they can confirm colour and hand-feel
  • Not enough for a retail launch, and not enough to judge colour consistency across a long run — that requires two production batches

That is the correct ambition for a trial: convert unknowns into knowns. You are buying information, not volume.

3. The five-step trial process

Step What happens Typical time
1. Specification Thickness, width, colour (Pantone or physical chip), surface (glossy / matte / embossed), hardness, end use, certification needed 1–3 days
2. Sample Stock colour sample cut from production; custom colour matched against your chip 2–5 days (stock), 7–10 (matched)
3. Trial PI Proforma invoice with gauge tolerance, quantity, price, delivery term and date in writing; deposit paid 1–2 days
4. Production Scheduled around existing runs; QC and slitting to your width 7–15 days
5. Shipping Courier or air for speed; LCL consolidation if you can wait 5–8 days air, 25–35 days LCL

The step that most buyers skip is step 1 — and it is the one that decides whether the trial is useful. A specification that says only “clear PVC 0.3 mm” leaves the two variables that matter most undefined: tolerance và surface finish. Write them down.

4. What a trial really costs per kilogram

A trial order costs more per kilogram than a container order, for three reasons. Knowing the shape of that premium stops it from feeling like a penalty.

Cost Trial order (100–300 kg) Container order (1.000 kg+)
Film price per kg +8% to +15% (cleaning scrap amortised over few kg) Base price
Freight per kg High — small shipments have no economy of scale Lowest per kg; a 20 ft takes 10–11 pallets
Phối màu Often charged or built into unit price Absorbed
Your risk if the spec is wrong A few hundred dollars The whole container, plus disposal

Two practical notes on freight. Below roughly 150 kg, express courier is often cheaper than air freight once handling and documentation are counted. Between 150 kg and 500 kg, LCL (less than container load) usually wins on cost but adds 25–35 days and one extra handling cycle at each end — film rolls are heavy and get clamped, so corner damage in consolidated cargo is common. If the trial is time-critical, pay for air and treat it as part of the learning cost.

5. From trial to repeat order

The trial premium should disappear on the second order, and the mechanism is quantity, not loyalty. A typical step structure:

  • 100–299 kg — trial: one colour, one thickness, small-batch premium applies
  • 300–499 kg — stock colours at normal price, no cleaning scrap to amortise
  • 500–999 kg — custom colours become economic; the colour change is justified by volume
  • 1.000 kg and above — monthly schedule, price locked for a defined period, capacity reserved

Two things make the second order cheaper and faster than the first: the specification is already written down, and the colour is already matched with a retained sample on file. Ask for the approved sample to be kept and labelled with your reference — without it, colour is re-matched from scratch and the trial cost is paid twice.

6. When a trial order is the wrong tool

Be honest with yourself about these cases, because pushing for a small order where the process cannot support it wastes weeks:

  • Non-standard width. A width that requires a new slitting setup has its own minimum; splitting a 100 kg run across two widths usually makes it uneconomic.
  • Special effects — glitter, pearl, holographic, fluorescent. These need a dedicated run and a cleaning cycle; expect 300–500 kg minimums regardless of supplier.
  • Certification-dependent formulations. If you need a new formulation tested to EN 71-3 or FDA, the test cost usually exceeds the film cost and belongs with a larger order.

In those cases the better path is a paid sample plus a documented specification, then a first order at the real minimum — not a trial that the plant will quietly run badly.

Frequently asked questions

Can I get a trial under 100 kg?

Sometimes, as a paid sample quantity rather than a production order — but expect it to be hand-cut or drawn from an existing run, not produced to your exact specification. Below 100 kg you are buying a sample, and you should judge it as one.

Will the trial price be deducted from my first full order?

Often the small-batch premium is credited against the next order above the minimum, but this must be agreed in writing on the trial PI. Ask specifically: “is the trial premium credited against my first container order?”

How long does a trial take end to end?

Realistically three to five weeks door to door: one week for specification and sample approval, one to two weeks for production, and one week for air freight. Add three to four weeks if you ship by LCL.

Do I need to pay for colour matching?

For stock colours, no. For a Pantone match or a physical chip, there is usually a one-off matching fee, sometimes waived if the subsequent order exceeds a threshold. Get the fee and the waiver condition in the same email.

What should I check first when the trial arrives?

Gauge and weight per metre before anything else — five micrometer readings per roll and a 100 × 100 mm weight check. If the gauge is right and the colour matches the retained sample, the rest of the trial is about how it runs on your machine.

Bước tiếp theo: send us your specification — thickness, width, colour reference and end use — and we will tell you which stock colours qualify for a 100 kg trial and which need a larger run. Stock options are listed on the danh sách hàng tồn; colours already matched are on the colour card. If you are still choosing a material, start with PVC vs TPU vs EVA.

Lên đầu trang
Nhắn tin WhatsApp Ask on WhatsApp
Nhận thẻ mẫu miễn phí — 3 mảnh màng PVC / TPU / EVA, gửi tận xưởng →
Kết nối với XSMATECH
Facebook WhatsApp admin@xsmatech.com WeChat: 13826083558