Evergreen buyer note · XSMATECH · PVC example at density 1.40



Buyers sometimes ask us to “fill a 40HQ” as though containers were sized in square metres. They are sized in tonnes and cubic metres, and for film the two limits do not bind at the same time.
The rule in one line
Film is dense. A 40HQ cube has about 76 m³ of internal volume but a payload of roughly 25–26 t. At PVC’s density of 1.40 g/cm³, 25 t occupies about 18 m³ of solid material — less than a quarter of the box even before roll packing voids. The container fills by weight long before it fills by volume.
So the useful number is not m³. It is m² per tonne, and then m² per container.
The table
| Thickness | m² per tonne | 20GP (26 t) | 40HQ (25 t) |
|---|---|---|---|
| 0.10 mm | 7,143 | 185,714 | 178,571 |
| 0.15 mm | 4,762 | 123,810 | 119,048 |
| 0.20 mm | 3,571 | 92,857 | 89,286 |
| 0.30 mm | 2,381 | 61,905 | 59,524 |
| 0.40 mm | 1,786 | 46,429 | 44,643 |
Two things follow that surprise people.
First, a 40HQ carries slightly less film than a 20GP at these payload assumptions, because the 20GP’s payload limit is higher. The 40HQ wins on volume, and film does not need volume.
Second, freight per m² falls as you downgauge. The container costs the same either way; halving the thickness doubles the square metres it carries. That is why a downgauge decision is often a freight decision as much as a resin decision.
Where the simple maths breaks
- Roll diameter and stacking. Long rolls on a 1.6 m width may not stack two-high in a 20GP; shorter rolls stack better. This changes the effective payload by 5–10%.
- Core and packing weight. Cores, stretch wrap and pallets can add 2–4% to gross weight, which comes out of payload.
- Destination axle limits. Some markets (and some inland routes) limit gross weight below the container’s rated payload; the booked weight must be the lower number.
- Customs weight declarations. Declared net weight and actual shipped weight must match within tolerance; film is usually stable, but moisture uptake in PE can shift it slightly.
What we do
We quote both units — CNY per kg and CNY per m² — and we give the m² per container at the gauge you are buying, so the freight per m² is visible before you book. For mixed orders (several colours or gauges), we calculate the load plan rather than splitting evenly, because roll diameter differences often allow more than a naive split.
We hold 1,062 tonnes across 94 grades. Stock colours ship in three days from 50 kg; production colours run 1–2 tonnes in 10–15 days. Load from Yiwu or Guangzhou, FOB or CIF.
Tell us the destination port and the gauge, and we will send the load plan with the quotation.
Contact: Oven Pan · admin@xsmatech.com · WhatsApp +86 138 2608 3558 · xsmatech.com
Payload assumptions: 26 t for 20GP and 25 t for 40HQ, deliberately conservative. Density: PVC 1.40 g/cm³. Actual payload depends on carrier, route and destination axle limits — always confirm with your forwarder.
