Half the thickness, half the price per square metre — the number buyers forget to compare

Evergreen buyer note · XSMATECH · applies to PVC, EVA, TPU and PE film

img-thicknessGiam mot nua do day, giam mot nua gia moi met vuong - XSMATECHSeparuh ketebalan, separuh harga setiap meter persegi - XSMATECH

Every film quotation in our inbox is written per kilogram. Almost every finished part is judged per square metre: how many bags, how many pockets, how many panels, how many metres of lamination.

Those are not the same number, and the gap between them is where suppliers win and buyers lose.

The two formulas

For any film, density ρ in g/cm³ (PVC ≈ 1.40, EVA ≈ 0.94, PE ≈ 0.92, TPU ≈ 1.20):

kg per m²      = thickness (mm) × ρm² per kg      = 1 / (thickness (mm) × ρ)CNY per m²     = thickness (mm) × ρ × price per kg

That is all. There is no supplier-specific magic in it. But it produces numbers that surprise people who only read the per-kg column.

What it does to a real quotation

Take PVC at 11 CNY/kg:

Thickness kg per m² m² per kg CNY per m² m² from 1 tonne
0.10 mm 0.14 7.1 1.54 7,143
0.15 mm 0.21 4.8 2.31 4,762
0.20 mm 0.28 3.6 3.08 3,571
0.25 mm 0.35 2.9 3.85 2,857
0.30 mm 0.42 2.4 4.62 2,381
0.40 mm 0.56 1.8 6.16 1,786

Doubling the gauge doubles the price per square metre. That part is expected. What is not expected is how often a purchase order is approved on the per-kg number and then renegotiated when the bag count comes out short.

Three places this bites

1. Downgauging without a test. Moving from 0.20 to 0.15 mm cuts cost per m² by 25% and also cuts tear strength, weld strength and stiffness. Sometimes that is exactly right; sometimes the customer rejects the first shipment. The cheap way to find out is a trial roll, not a container.

2. Comparing quotes at different gauges. A supplier quoting 10.5 CNY/kg at 0.15 mm is more expensive per m² than one quoting 11.2 CNY/kg at 0.12 mm. The per-kg column reverses the ranking.

3. Unit confusion: micron, mm and gauge. Chinese factories usually speak in mm, buyers in micron (1 µm = 0.001 mm), and some markets in gauge (1 gauge = 0.01 mm = 10 µm). A “200 gauge” film is 0.05 mm — a fifth of what a “200 µm” film is. We have seen a 5× error reach a purchase order.

What we do about it

Every quotation we send carries both numbers: CNY per kg and CNY per square metre at the gauge quoted, plus m² per tonne so the buyer can convert their own forecast. If two of our grades are being compared, we convert both.

We hold 1,062 tonnes across 94 grades. Stock colours ship in three days from 50 kg; production colours run 1–2 tonnes in 10–15 days. Load from Yiwu or Guangzhou, FOB or CIF.

Send us the part you are making and the gauge you think you need, and we will quote both units — and tell you which gauge we would use.

Contact: Oven Pan · admin@xsmatech.com · WhatsApp +86 138 2608 3558 · xsmatech.com

Densities used: PVC 1.40, EVA 0.94, PE 0.92, TPU 1.20 g/cm³ (typical, non-foamed). Actual density varies by formulation and filler content; ask for the data sheet of the exact grade.

Scroll to Top
WhatsApp us
Note: Prices shown are indicative. The final unit price depends on order quantity, the date you order (resin moves weekly), and your specific requirements on colour, thickness, surface and certification. Ask us for a firm quote against today's market.
Connect with XSMATECH
Facebook WhatsApp admin@xsmatech.com WeChat: 13826083558