Search

How to Choose Film by Application: Cosmetic Bags, Beach Bags, Pencil Cases

Start with three questions, not with a material

Buyers usually ask which film is best. The better question is what the bag has to survive: how it is joined, what it touches, and which market it is sold into. Those three answers decide the polymer, the gauge and the surface treatment, in that order.

  • Joining: sewing, high-frequency welding or heat sealing. Each one needs a different stiffness and surface.
  • Contact: cosmetics with alcohol or oil, sun and salt water, or a child's hands for a full school year.
  • Market: EN71-3 and phthalate limits for the EU, CPSIA for the US, REACH for both.

Cosmetic bags and toiletry pouches

The window has to stay clear. Clear PVC at 0.20 to 0.30 mm is the standard choice because it is transparent, printable and weldable. If the bag is folded daily or shipped in cold containers, move to TPU 0.15 to 0.25 mm: it does not whiten on the fold and stays soft at low temperature.

Printing decides whether the bag still looks new after a year. Reverse-printed film keeps the ink behind a clear layer. Surface printing is cheaper but needs a corona-treated side and a lacquer top coat if the pouch will be wiped with alcohol.

Beach bags and summer totes

Sun and salt are the real test. A beach tote is folded flat, stuffed, dragged and left in the car, so the film needs high tear strength and UV stability. PVC at 0.30 to 0.50 mm is the workhorse; TPU at 0.20 to 0.35 mm is the upgrade when the brand wants a softer hand and no plasticiser.

Joining matters more here than anywhere else: a sewn seam on 0.40 mm PVC holds better than a thin weld, while TPU welds cleanly and can be sewn without cracking.

Pencil cases and kids' pouches

Compliance comes before colour. For the EU, the film must pass EN71-3 migration and stay within phthalate limits; for the US, CPSIA applies. Phthalate-free PVC at 0.25 to 0.35 mm and TPU at 0.20 to 0.30 mm both work; TPU removes the plasticiser question entirely.

Print has to survive a school year in a backpack. Reverse print plus a matte or gloss lacquer is the usual answer, and the same roll can be die-cut for pencil cases and pouches without changing the specification.

Selection at a glance

  • Clear cosmetic window: PVC 0.25 mm, corona treated, reverse print
  • Soft-touch cosmetic pouch: TPU 0.20 mm, no plasticiser
  • Beach tote, sewn: PVC 0.40 mm, UV stabilised
  • Beach tote, welded: TPU 0.30 mm
  • Pencil case for the EU: phthalate-free PVC 0.30 mm or TPU 0.25 mm

What to send for an accurate quote

Send six things and we can quote the same day: thickness in mm or micron, width in cm, colour (Pantone or sample), surface (gloss, matte, embossed), print (none, reverse, surface) and order quantity. Add the destination market if compliance certificates are needed.

FAQ

Can one film cover all three products? A clear PVC at 0.30 mm can be used for all three, but it is a compromise: too stiff for a soft pouch and not tear-resistant enough for a loaded beach tote.

Is TPU worth the higher price? For products that are folded, stored cold or sold as premium, yes. For a printed promotional tote, PVC usually wins on cost.

What thickness for sewing versus welding? Sewing needs 0.30 mm and above so the seam does not pull through; welding works from 0.15 mm upward.

Do you supply compliance documents? Yes: EN71-3, ROHS, REACH and phthalate test reports are available with the quotation.

Send your gauge, width and target application, and we will reply with the recommended film and a price within 24 hours.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top
WhatsApp us
Connect with XSMATECH
Facebook WhatsApp admin@xsmatech.com WeChat: 13826083558